Return Key
The Return Key may be set to CR (Carriage Return) or CRLF (a combination
of Carriage Return and Line Feed.)
Answer Back Message
This option is used to establish a question and answer sequence between
the host and the client. This message is limited to 20 characters. The
answerback message is typically used to identify the terminal to the host
by sending a message to the host automatically, without operator action.
Hexadecimal is represented by the tilde and hex number. (An hexadecimal
example is ~0D for hex 13, which represents the 13th
ASCII character sequence.)
Local Echo
This option echoes back each character typed; for instance, when p3 is
typed, pp33 is displayed back because the host will also send back the
p and the 3.
Wrap Around
The Wrap around option permits typing beyond the 80-character limitation
(on an 80 character-wide screen) by wrapping the continued line on to
the next line.
Line Transmit Mode
This option sends an entire line. Compare this to the normal character
transmit mode, where each character is sent on a character-by-character
basis.
Reverse Screen Image
This option reverses the background and foreground colors. For instance,
the customary black background with green letters becomes a green background
with black letters.
Scroll Speed (Lines Per Second)
Determines the speed at which lines will scroll on the emulation screen
(from 1 to 100; default is 5). When this option is disabled, lines of
data will scroll as fast as they are received from the host.
Bypass Windows Printer
Driver
Enable this option to send print jobs directly to the printer without
interpretation by the Windows printer driver. This removes the form
feed sent by the driver at the end of print jobs.
Disable Printer Translation
Enable the Disable Printer Translation option
to prevent any character translation and to print characters exactly
as they come from the host. No character set translation is made from
the host code page to the PC code page. You should use this option
if the host already generates characters in the correct character
set for your printer.
Note: the Bypass
Windows Printer Driver option must
be enabled to use this feature.
Finish
Printing Time-out Value
Uses a timer to close the print
job instead of closing it whenever ESC[4i command is issued.
Status Line
This option allow you to select which of the following items are shown
on the OAI line.
Indicator
Traditional OAI indicator with line cursor position and other indicators.
None
Nothing is shown on the OAI line.
Host
Host written information. The text that the host has written to this
line.